Dallas Licensed Electricians
Electrician in Dallas, TX
Panel upgrades, rewiring, EV chargers, and troubleshooting from licensed Dallas electricians — permitted, code-compliant, and done right the first time.
Licensed Electrical Work for Dallas Homes and Businesses
Many of the prettiest homes in Dallas hide the oldest wiring. Walk through the M Streets, Munger Place, or a mid-century ranch in Preston Hollow and you will find 60- and 100-amp panels, two-prong outlets, and the occasional run of aluminum branch wiring — none of it built for today’s EV chargers, heat pumps, and kitchen full of appliances.
Ideal Services handles electrical work for homes and businesses across Dallas, from a single flickering circuit to a whole-home rewire. Every job is done by licensed electricians to the National Electrical Code, with City of Dallas permits pulled and inspections scheduled so the work is safe, documented, and ready for a future home sale.
Overloaded panels and aging wiring are not just an inconvenience — they are the leading cause of electrical fires. When a breaker trips again and again or an outlet feels warm, that is the system asking for help before it becomes an emergency.
At a Glance
- Electrical panel upgrades and replacements to 200 amps
- Whole-home and partial rewiring for older Dallas houses
- Level 2 EV charger installation
- Lighting, fixtures, ceiling fans, and recessed cans
- Outlets, switches, GFCI, and AFCI protection
- City of Dallas permits and code-compliant, inspected work
Electrical Services We Offer
Panel Upgrades & Replacements
Move from an overloaded 60- or 100-amp panel to a modern 200-amp service that can carry EV charging, a heat pump, and everything else at once.
Whole-Home Rewiring
Replace aging, brittle, or aluminum wiring in older Dallas homes with safe copper runs that meet current code.
EV Charger Installation
Level 2 charger circuits sized and installed for your garage or driveway, with the panel capacity checked first.
Lighting & Fixtures
Recessed lighting, ceiling fans, under-cabinet lights, and fixture swaps installed cleanly and safely.
Outlets, Switches & GFCI
New circuits, USB outlets, and code-required GFCI and AFCI protection for kitchens, baths, and exteriors.
Troubleshooting & Repairs
Tripping breakers, dead outlets, flickering lights, and buzzing panels traced to the real cause and fixed.
Signs Your Dallas Home Needs an Electrician
Electrical problems tend to whisper before they shout. If you notice any of these, have a licensed electrician take a look before it escalates.
- Breakers that trip again and again
- Lights that flicker or dim when appliances start
- Outlets or switch plates that feel warm
- Two-prong, ungrounded outlets around the house
- A buzzing or crackling sound from the panel
- A burning or plastic smell near outlets
- Still running a 60- or 100-amp panel
- Aluminum branch wiring from the 1960s-70s
How Our Electrical Service Works
Call & Schedule
Reach us for a scheduled visit or a same-day electrical emergency in Dallas.
Inspect & Diagnose
A licensed electrician finds the real fault instead of just resetting the breaker.
Upfront Quote
You approve a flat-rate price in writing before any work begins.
Permitted Work
We complete the job to NEC code, pull City of Dallas permits, and schedule inspection.
Why Older Dallas Wiring Needs Attention
Dallas grew in waves, and its wiring shows it. Homes in Lakewood, Kessler Park, and the M Streets were built for a era of a few lamps and a radio, not a household running a dozen high-draw devices at once. The original panels simply were not sized for modern demand.
Every upgrade you add compounds the load. A new heat pump, an EV in the garage, a kitchen remodel — each one pulls more current through wiring and a panel that may already be at its limit. That is when breakers start nuisance-tripping and connections begin to overheat.
Code has moved on too. Today’s NEC requires GFCI and AFCI protection in places older homes never had it, and grounding standards have tightened. Bringing a home up to current code is not just safer — it protects your insurance coverage and makes the house easier to sell.
100-Amp Panel vs. 200-Amp Upgrade
| Factor | 100-Amp Panel | 200-Amp Upgrade |
|---|---|---|
| Total capacity | Often maxed out | Room to spare |
| EV charging | Rarely enough | Supports Level 2 |
| Modern HVAC | Can strain the panel | Handled comfortably |
| Breaker tripping | Common under load | Sharply reduced |
| Home resale | A buyer red flag | A selling point |
| Code & safety | May be outdated | Current NEC standards |
Why Dallas Chooses Ideal Services for Electrical
Licensed Electricians
Texas-licensed pros who work to NEC code, not shortcuts.
Permitted & Inspected
We pull City of Dallas permits so the work is documented and safe.
Upfront Flat Pricing
The written price is the price — approved before we start.
One Company for HVAC & Electric
The electrical your new AC or heat pump needs, handled in-house.
Emergency Response
24/7 service for sparking outlets, dead panels, and safety hazards.
Clean, Careful Work
We respect your home and leave the job site tidy.
Electrical FAQs
Do I need to upgrade my electrical panel in Dallas?
If you still have a 60- or 100-amp panel, breakers trip under normal use, or you are adding an EV charger or heat pump, a 200-amp upgrade is often the right move. We assess your actual load before recommending one.
Can you install a Level 2 EV charger at my home?
Yes. We size the circuit, confirm your panel has capacity (or upgrade it), run the wiring, and install the charger to code with a City of Dallas permit.
How much does it cost to rewire a house?
It varies with size, access, and how much wiring is being replaced. We inspect the home and give a written, flat-rate quote so there are no surprises once work starts.
Do electrical jobs in Dallas require a permit?
Panel upgrades, rewiring, new circuits, and most significant work do. We pull the City of Dallas permit and schedule the inspection as part of the job.
Why do my breakers keep tripping?
Frequent tripping usually means an overloaded circuit, a short, or a failing breaker. It is the system protecting itself, and it should be diagnosed rather than repeatedly reset.
Do you offer emergency electrical service?
Yes. For burning smells, sparking outlets, or a dead panel, we offer 24/7 emergency electrical response across Dallas.
Explore Our Other Services
We keep Dallas homes and businesses running on both sides of the meter. Here is where to look next.
Contact Ideal Services
Need a Dallas Electrician?
From panel upgrades in the M Streets to EV chargers in Lake Highlands, our licensed electricians do permitted, code-compliant work. Call for a flat-rate quote today.
Call (817) 380-9631Request ServiceServing Dallas & DFW
View on Google Maps ›